Ball Bearing Drawer Slides
Better life

How to Install Soft Close Drawer Slides?


How to Install Soft Close Drawer Slides?

Do you find it easy to close the drawer with a hard slam? Have you ever had your fingers caught by the drawer? Soft close drawer slides can be a perfect solution to your troubles. They are easy to install, easy to use, and make your kitchen quieter and safer. You only need to spend a short time to enjoy the convenient experience of soft-close drawer slides. So, do you know about soft-close drawer slides? Do you know how to install soft close drawer slides? Read on to learn more to help you with this simple DIY project.

Ball Bearing Drawer Slides

What are soft-close drawer slides?

Soft close drawer slides provide a liquid that can be utilized to cushion performance. Soft close drawer slides are designed to achieve a muffling cushioning effect. It uses a new technology to fully adapt to the closing speed of the drawer. When you close the drawer, the soft-close slides will slow down the drawer under hydraulic pressure, thus making it quiet and smooth to close the drawer. Each soft close drawer slide is equipped with a spring and hydraulic system to control the closing of the drawer.

Advantages of Soft Close Drawer Slides

1. More secure

With just a gentle push, the soft-close drawer will close automatically, which effectively prevents your fingers from being accidentally pinched by the closed drawer.

2. Longer service life

Soft close drawer slides use hydraulic deceleration, which can effectively reduce the impact force and avoid the drawer from being slammed when it is closed, thus having a longer service life. No need for you to carry out maintenance.

3. Quiet and smooth closing

Soft close drawer slides allow you to avoid noise when opening and closing drawers, thus creating a quiet and comfortable environment.

Soft Close Drawer Slides Types

1.European soft-close drawer slides

2.Ball-bearing soft-close drawer slides

3.Double-wall soft-close drawer system

Soft Close Drawer Slides Installation Steps

Step 1 Measure the depth of the drawer

Before installation, you need to measure the depth of the drawer first. You need to choose the size of the soft-close drawer according to the depth of the drawer. At the same time, you also need to pay attention to the distance requirement of screw installation and set aside the installation position of the screws in advance.

Step 2 Punch a hole to determine the slide installation position

After measuring the depth of the drawer, determine the size of the damping slide specifications, according to the installation needs of the drawer side punching. When punching the holes, make sure the installation position is good to avoid offset.

Step 3 Tighten the drawer slides screws

After the preparatory work is done, start to install the damping slides, first install the slides on the side panel of the drawer, use a screwdriver to tighten the screws. After the installation, try it by hand to see if it can be shaken, and it is better to be stable and not move.

Step 4 Install the drawer

Install the slides on the side panel of the counter. You should keep the drawer parallel to the level of the drawer slides. Otherwise, the drawer will not fit properly. After installing the slides, put the drawer into the slides and pull the drawer out several times to check if it opens and closes smoothly. If there is noise, adjust the slides accordingly.