adjustable cabinet hinge

How To Use Adjustable Cabinet Hinges

We all need to save cash. This is why we shop for sales, coupons, rebates, and the like. You may have started stocking up on adjustable cabinet hinges to save money too, but have no clue about how to make use of these hinges.

The adjustable cabinet hinge is a simple mechanism that allows the opening angle of a door to be adjusted. They are occasionally called tilt hinges or beaded/adjustable hinges.

Once you read this article, you will not have any problem installing adjustable cabinet hinges into your home’s cabinets or cabinets in your business.

adjustable cabinet hinge

What are Adjustable Cabinet Hinges?

The adjustable cabinet hinge is a part that is composed of two pieces of metal. One piece is the top part of the cabinet door and the other piece is the bottom part. The two parts screw into each other to create one complete cabinet hinge.

Adjustable cabinet hinges work in a very simple method. The tilt, or beaded, the hinge has a ball joint at the base that allows it to open to any angle within 90 degrees on either side of the center. If you want to open a door just 30 degrees, that can be done although it may not be very elegant looking in this configuration.

There are two types of adjustable cabinet hinges: full overlay and half overlay. Full overlay hinges have their pivot points on the outside edge of the door, while half overlay hinges have their pivot points on the inside edge of the door.

The difference between these two types is how much space they take up on either side of the door when closed-full overlays take up slightly more space than half overlays do (although this can vary depending on which brand or model you choose).

Why should I use adjustable cabinet hinges?

Adjustable cabinet hinges are very practical for cabinets that will be used for different purposes. Let’s say you have a cabinet that you use as a pantry. A door that opens all the way can be a considerable space problem as you will have to walk through it in order to open the door wide enough.

On the other hand, if you use an adjustable cabinet hinge, you can set the door at a very small opening and still be able to access the contents inside. Additionally, adjustable cabinet hinges allow you to change the opening angle of a door so that it is more convenient and better suited to the purpose you are using it for.

What are some of the benefits of using adjustable cabinet hinges?

The adjustable cabinet hinge has several benefits that you will enjoy. Here are just a few of them:

  1. Easily adjustable so that you can open the door to your desired angle
  2. Can be used on any hinge material, such as wood or metal
  3. Can be installed on existing doors without the need to replace them
  4. Available in a wide range of styles, finishes, and materials so that they match all types of cabinets, kitchen ranges, cupboards, and other products
  5. Can remain on the door at all times without needing to be removed when not in use
  6. Can be found in hardware stores and online


How to Use Adjustable Cabinet Hinges

It is very easy to install adjustable cabinet hinges. Here is a simple step-by-step guide that will show you how to install adjustable cabinet hinges.

Step 1. Figure out where you want to install the hinge and mark the area. You should have access from all sides of your door frame to adjust the hinge if required easily. For example, if your door frame is 12″ wide, make sure that you have room for the hinge on both sides of your door frame and at the top and bottom.

Step 2. If the hinge has a ball joint at the base, screw it into place so that it will not move around when opened or closed. If the hinge does not have a ball joint but instead uses a screw, make sure that the screw is long enough to allow the hinge to move around.

Following that, you will need to open the hinge and then slide it into place so that it is either flush or slightly recessed into one of your door frames.

Step 3. Once you have slid it into place, make sure that you have adjusted it to either flush or slightly recessed in one of your door frames. If you do not adjust the hinge accordingly, you risk opening and closing the door because of uneven pressure on both sides.

Step 4. Screw the hinge into place. You may use wood glue if you have any handy, but it is unnecessary.

Step 5. Now that the hinge is secured in your door frame, you can slide a cabinet door over it and drill holes into the hinges to secure it in place as well. If your door has a latch rather than a handle, you may need to remove the latch and attach the screws directly to the right side of your cabinet doors.

If so, drill holes in your cabinet doors and then secure them with screws that are long enough to sit flush with or slightly recessed into your cabinet doors and your existing door frames.

Step 6. You can now install your cabinet door and adjust the hinge to either flush or slightly recessed into your door frame.



Adjustable cabinet hinges are a great way to save money and give your cabinets a new look. Most homeowners can easily install them and do not require any special skills or tools.

Since they are easily adjustable, they allow you to adjust the opening angle of the doors to your desired size so that they fit better into the space available, and you can use them for your different purposes at all times.

Adjustable cabinet hinges are convenient, practical, and easy to use too. Go ahead and try out these adjustable cabinet hinges today!

One thought on “How To Use Adjustable Cabinet Hinges

Leave a Reply

Your email address will not be published. Required fields are marked *