Ironing Boards Since 2011
OEM & ODM Ironing Boards: Build Them Under Your Brand
Venace offers three levels of branded manufacturing: OEM, where your logo and packaging go on proven Venace designs; ODM, where sizes, mechanisms.
Wholesale & Manufacturing
Direct answer: Venace offers three levels of branded manufacturing: OEM, where your logo and packaging go on proven Venace designs; ODM, where sizes, mechanisms, finishes and covers are engineered to your specification; and design service, where cut-out templates and installation guides are produced in your brand. Custom tooling applies only when a new board or cabinet size is required.
Key buyer questions
What is the difference between an OEM and an ODM ironing board order?
Branding or customization must be reviewed against the chosen model, artwork, packaging, order quantity, and destination requirements. Ownership, approvals, confidentiality, tooling, and permitted use should be written into the project documents.
Can a factory make an ironing board to a cabinet maker's own dimensions?
Check stored dimensions, usable surface and working clearance against the current product drawing. Measure both the stored position and the full operating path, including doors, drawers, appliances, user stance, and service access.
How long does it take to develop a custom ironing board design?
The answer varies by model, quantity, customization, packaging, destination, and current production conditions. Ask for a written quotation that states the exact product revision and every assumption; do not rely on a category-level number or an older order.
What is the difference between OEM, ODM and private label?
Choose oem ironing board manufacturer from the room, user, and workflow—not appearance alone. Compare storage location, usable ironing surface, opening movement, fixing method, working height, iron placement, service access, and expected frequency of use.
A space-saving ironing board belongs on the shortlist only when the stored and working envelopes fit. Use the same criteria for each candidate and review the current drawing plus a representative sample before standardizing a model across rooms or sales channels.
Which parts of an ironing board can be customized?
Choose oem ironing board manufacturer from the room, user, and workflow—not appearance alone. Compare storage location, usable ironing surface, opening movement, fixing method, working height, iron placement, service access, and expected frequency of use.
A space-saving ironing board belongs on the shortlist only when the stored and working envelopes fit. Use the same criteria for each candidate and review the current drawing plus a representative sample before standardizing a model across rooms or sales channels.
When does a custom ironing board need new tooling?
For oem ironing board manufacturer, begin with the intended user, storage location, and required workflow. The category name creates a shortlist; the exact drawing, instructions, sample, evidence, and commercial assumptions decide whether the product is suitable.
Review the relevant VENACE ironing board format, then confirm site dimensions and project requirements in writing before approval.
How does an ODM project run from drawing to production?
Evaluate oem ironing board manufacturer through a traceable chain: approved drawing, representative sample, incoming-material checks, in-process functional checks, final inspection, and packing verification. The record should identify the model, batch, revision, sample size, method, and result.
For a space-saving ironing board, inspect stable deployment, locking or retention where specified, movement, flatness, finish, fasteners, cover condition, and included parts. A test load is not automatically the same as a supplier-rated working load; request the exact-model evidence.
What should an OEM RFQ include?
A B2B inquiry for oem ironing board manufacturer should state the application, preferred format, dimensions, trial and expected order quantities, destination, branding, packaging, documentation, and requested delivery window.
Compare suppliers against one written baseline. Approve the drawing, sample, artwork, inspection plan, and packing method before mass production, and record every accepted change by revision so the delivered product can be checked objectively.
Which brands and cabinet makers use OEM ironing boards?
Installation of a space-saving ironing board starts with the wall or cabinet construction, fixing locations, stored dimensions, usable surface and working clearance, and access to each mounting point. Fastener selection must follow the actual substrate, loads, current drawing, and local practice.
Check the complete opening and rotation path before drilling or cutting. Coordinate doors, drawers, shelves, appliances, outlets, circulation, and service access; structural or electrical work should be handled by qualified people where required.
What evidence should support the decision?
Connect each decision to current, model-specific evidence. Retain the application brief, revision-controlled drawing, approved sample, quotation, and purchase specification so the delivered product can be checked against the same baseline.
| Decision point | What to confirm | Evidence to retain |
|---|---|---|
| Application | Defines the correct product family | Room or cabinet brief |
| Specification | Makes offers comparable | Revision-controlled drawing |
| Sample | Tests fit, movement, and finish | Approved sample record |
| Order | Aligns quality, packaging, and delivery | Purchase specification |
How should a buyer use this information?
Use this page as a screening and briefing tool for OEM & ODM Ironing Boards: Build Them Under Your Brand. Turn the relevant points into a written requirement, compare candidates against the same baseline, and retain the drawing, sample, evidence, and approval revision that supports the decision.
What should you send with an inquiry?
- Buyer type, destination market, and intended application
- Preferred ironing board format or current model reference
- Site, wall, or cabinet dimensions with marked reference points
- Trial quantity and expected order quantity
- Finish, branding, packaging, and documentation requirements
- Requested delivery window and destination
Frequently asked questions
Can the board size be changed without new tooling?
Check stored dimensions, usable surface and working clearance against the current product drawing. Measure both the stored position and the full operating path, including doors, drawers, appliances, user stance, and service access.
Can you match a cabinet maker's door and finish?
Check stored dimensions, usable surface and working clearance against the current product drawing. Measure both the stored position and the full operating path, including doors, drawers, appliances, user stance, and service access.
Who owns the design in an ODM project?
Branding or customization must be reviewed against the chosen model, artwork, packaging, order quantity, and destination requirements. Ownership, approvals, confidentiality, tooling, and permitted use should be written into the project documents.
Can OEM orders use the customer's own cover fabric?
Branding or customization must be reviewed against the chosen model, artwork, packaging, order quantity, and destination requirements. Ownership, approvals, confidentiality, tooling, and permitted use should be written into the project documents.