Folding pull-out
A board that pulls forward from cabinetry and folds for storage. Review its extension path and the space needed to work around it.
Ironing Boards Since 2011
Considering Rev-A-Shelf CROIBSL-14? Start with the installation
Compare the space and mounting conditions before choosing an ironing board for your cabinet or closet project.
If CROIBSL-14 is on your specification list, use it as a starting point for discussing the installation format. Explore VENACE’s existing folding pull-out and built-in cabinet options, then share the layout for a project-specific review.
Discuss your cabinet project
Explore folding pull-out boards
Five conditions to compare
A useful comparison follows the board from storage to use. Record the same installation conditions for each option and check them against the current manufacturer’s drawing.
| Condition | What to record | What to confirm |
|---|---|---|
| Clear internal space | Usable width, depth and height, including hinges and shelving. | Both the stored position and access through the opening. |
| Mounting construction | Proposed mounting surface, panel material and thickness. | Fixing positions, suitable fasteners and supporting construction. |
| Operating envelope | Door swing, extension path and surrounding obstructions. | Space for the complete opening and closing movement. |
| Working position | Preferred height, approach direction and standing space. | Practical access for the intended users. |
| Product documentation | Exact model, configuration and drawing revision. | The applicable installation instructions before fabrication. |
A shared product category or similar appearance does not establish interchangeability. Review the complete installation before changing an existing cabinet.
Consider the VENACE installation formats
Built-in cabinet
A vertically stored option for wardrobe and closet applications. Review the side-panel mounting location and movement into the working position.
Bring the right information to the discussion
- Provide a marked cabinet drawing or clear photographs, with measurement units identified.
- State the model being considered, installation stage, intended application and destination market.
- Identify which dimensions or fixing positions are already committed in your cabinet design.
Use product references and drawing requests to check the available documentation. Visit compliance references to frame destination-market documentation questions. Confirm the documents applicable to the selected product.
Manufacturer reference: Rev-A-Shelf’s official ironing-board range lists CROIBSL-14 variants in the shelf-mounted Elite Rotating range. Obtain its current model documentation directly from the manufacturer. Rev-A-Shelf is a third-party brand; no affiliation or endorsement is implied.
Review your next cabinet installation
Send the project requirements and the VENACE format of interest. Fit, configuration, documentation and commercial terms will be confirmed for the selected product and project.