Ironing Boards Since 2011
Ironing Board PDF References and CAD Drawing Requests for Designers
Download existing VENACE ironing board PDF references. Confirm current model dimensions and revisions with our team; ask whether CAD, DWG or Revit files are available.
Dimensions & Installation
Direct answer: Download four existing VENACE product PDFs below. They are reference files, not current installation approvals. CAD, DWG and Revit files are not instant downloads; ask VENACE about availability for the exact model.
Existing PDF references
These downloadable files are retained for reference. Before procurement, fabrication or drilling, request the current model-specific drawing and confirm its revision, dimensions, mounting condition and clearance with VENACE.
- Wall-Mounted Ironing Board PDF
- Wall-Mounted Fold-Down Ironing Board PDF
- Folding Pull-Out Ironing Board PDF
- Ironing Board Holder PDF
Request current drawings for your exact model View the original download library
Key buyer questions
Where can architects obtain a built-in ironing board CAD block?
No CAD block is offered as an instant download on this page. Send the exact model, intended cabinet or wall condition, required file format and project dimensions through our contact form; VENACE can confirm whether a current drawing or CAD file is available.
Is a Revit family available for a wall-mounted ironing board?
Availability is not confirmed by this page. Ask for the exact model and required revision before relying on any BIM file for design or procurement.
What dimensions should a designer allow for an ironing board cabinet?
Check stored dimensions, usable surface and working clearance against the current product drawing. Measure both the stored position and the full operating path, including doors, drawers, appliances, user stance, and service access.
Which file formats are available?
Four existing product PDFs can be downloaded above. This page does not currently provide direct DWG, DXF, Revit or ZIP downloads. For a model-specific drawing, tell VENACE the product reference and required format; availability and revision must be confirmed before use.
What does each file contain?
The linked PDFs are existing product references. Their content varies by file and should not be assumed to contain a current cut-out drawing, full installation requirements, packaging data or CAD model. Use the latest approved, model-specific documentation for manufacturing and installation decisions.
How are clearances shown in the blocks?
The fit question for ironing board cad block is decided by stored dimensions, usable surface and working clearance. Mark the reference points on a drawing, keep one primary unit system, and verify both the stored envelope and the full working envelope.
Allow for doors, drawers, shelves, appliances, the user’s stance, garment movement, the iron and cord, and access to fasteners or service parts. Typical category dimensions are useful for screening; the current model drawing controls installation.
How do you request a custom-size file?
Contact VENACE with the model or application, cabinet or wall dimensions, unit system, intended file format, project quantity and destination. Our team will confirm whether a suitable current drawing can be supplied. A custom file should not be treated as approved until its revision is agreed in writing.
How should the files be used in a spec?
For ironing board cad block, begin with the intended user, storage location, and required workflow. The category name creates a shortlist; the exact drawing, instructions, sample, evidence, and commercial assumptions decide whether the product is suitable.
Review the relevant VENACE ironing board format, then confirm site dimensions and project requirements in writing before approval.
How are files kept current?
For ironing board cad block, begin with the intended user, storage location, and required workflow. The category name creates a shortlist; the exact drawing, instructions, sample, evidence, and commercial assumptions decide whether the product is suitable.
Review the relevant VENACE ironing board format, then confirm site dimensions and project requirements in writing before approval.
What evidence should support the decision?
Connect each decision to current, model-specific evidence. Retain the application brief, revision-controlled drawing, approved sample, quotation, and purchase specification so the delivered product can be checked against the same baseline.
| Decision point | What to confirm | Evidence to retain |
|---|---|---|
| Stored envelope | Protects cabinet and room planning | Closed-position drawing |
| Working envelope | Prevents doors and circulation conflicts | Open-position drawing |
| Fixing condition | Supports installation planning | Wall or panel specification |
| User workflow | Confirms reach and iron placement | Sample-room review |
How should a buyer use this information?
Use this page as a screening and briefing tool for Ironing Board CAD Blocks, DWG/Revit Files and Spec Sheets for Designers. Turn the relevant points into a written requirement, compare candidates against the same baseline, and retain the drawing, sample, evidence, and approval revision that supports the decision.
What should you send with an inquiry?
- Buyer type, destination market, and intended application
- Preferred ironing board format or current model reference
- Site, wall, or cabinet dimensions with marked reference points
- Trial quantity and expected order quantity
- Finish, branding, packaging, and documentation requirements
- Requested delivery window and destination
Frequently asked questions
Are files available in metric?
The existing PDFs may include metric dimensions, but they are not a guarantee of current model dimensions. Request a current, model-specific drawing and confirm any inch conversion before release.
Can I use the files in SketchUp?
It may be possible, but the answer depends on the selected product, site conditions, and project specification. Verify the current drawing, instructions, and a representative sample before treating the option as approved.
Do files include the cabinet door?
Check stored dimensions, usable surface and working clearance against the current product drawing. Measure both the stored position and the full operating path, including doors, drawers, appliances, user stance, and service access.
Is there a BIM object with parameters?
It may be possible, but the answer depends on the selected product, site conditions, and project specification. Verify the current drawing, instructions, and a representative sample before treating the option as approved.