Importers & distributors
Compare models, packaging and sample requirements for wholesale or trade supply.
VENACE · Australia B2B
Ironing Boards for Australian Laundries & Wardrobes
VENACE supplies space-saving ironing boards for Australian cabinet makers, joiners and trade buyers. Compare wall-mounted, pull-out and built-in formats for laundry cabinetry, European laundries and walk-in robes.
Manufactured in Guangzhou, China for export supply. Request current drawings, a sample review or a written quote for your Australian project. Product fit and commercial terms are confirmed per enquiry.
Ironing Boards Since 2011B2B supply for cabinetry, laundry spaces and project fit-outs.
Since 2011Focused ironing board supply
4 formatsWall, fold-down, pull-out and built-in
B2B enquiriesTrade, OEM and project review
Export supplyFrom Guangzhou, China
Who we support
Who are VENACE ironing boards for in Australia?
This is a B2B buying guide for Australian trade and project enquiries. Importers, hardware distributors, cabinet makers and joinery businesses can compare formats and request model-specific information. It is not a retail checkout.
Cabinet makers & joinery
Compare installed formats and request the relevant drawing before finalising cabinetry.
Contractors & designers
Review laundry, wardrobe and apartment fit-outs before specifying the installation.
Hotels & apartments
Discuss repeatable product selection and installation review for accommodation projects.
Australian spaces
Which format should you consider for your laundry or wardrobe?
Start with the available space and how the board will open. A concealed cabinet format and a wall-mounted format have different mounting and clearance needs. These scenarios are starting points for a drawing review, not a guarantee of fit.
Dedicated laundry
Consider a folding pull-out or built-in board where planned cabinetry can accommodate the stored unit and its full extension.
Check: internal cabinet dimensions, drawer access and clear working space in front of the benchtop.
European laundry
A European laundry is a compact laundry area concealed within a cupboard. Compare cabinet-integrated and wall-mounted formats against the actual layout.
Check: cupboard door travel, appliance access, mounting position and clearance when the board is open.
Wardrobe & walk-in robe
Consider a built-in format for planned wardrobe joinery, subject to the selected model’s drawing and mounting requirements.
Check: shelves, hanging clothes, door hinges and the space needed to extend or rotate the board.
Product directions
Which ironing board format suits an Australian project?
Choose by mounting position, stored size and opening movement. Compare these four formats, then confirm the exact model, dimensions and installation clearances against its current drawing.
Wall installation
Wall-Mounted Ironing Board
A folding, swivelling format for laundry or utility areas with a suitable mounting wall. Check wall fixings and rotation clearance.
Fold-down format
Wall-Mounted Fold-Down Board
A fold-down format for a planned laundry wall position. Confirm the mounting surface and clear space in front of the open board.
Cabinet pull-out
Folding Pull-Out Ironing Board
A concealed pull-out format to review for laundry cabinetry. Check the internal cabinet space, opening and full extension path.
Built-in cabinetry
Built-In Ironing Board
An integrated format to review for wardrobe joinery, walk-in robes and laundry fit-outs. Match the current drawing to the cabinet layout.
Plan the fit
What cabinet measurements do we need?
Send the internal clear width, depth and height in millimetres (mm). Include a sketch or cabinet drawing and the intended mounting position so the relevant product drawing can be reviewed.
- Internal clear width × depth × height, in mm
- Carcase material and side-panel thickness
- Door hinges, drawer runners and opening layout
- Full extension, rotation and working clearances
- Wall substrate and fixing requirements, if wall-mounted
- Preferred format, quantity and delivery suburb / postcode
Nominal cabinet width is not internal clearance. A cabinet described as 450 mm or 600 mm wide does not by itself confirm compatibility. Allow for panels, hardware and the selected model’s installation requirements.
Enquiry process
How does the VENACE B2B enquiry process work?
Send your brief, review the drawing, then confirm the written offer. Price, MOQ, sample terms and lead time are quoted for the selected model, quantity, customisation and Australian destination.
Send the project brief
Share your business type, application, measurements in mm, quantity and Australian delivery postcode.
Review the model & drawing
Review dimensions, mounting and clearance requirements before finalising cabinetry. Ask about a sample where needed.
Confirm the offer
Available specifications and commercial terms are confirmed in writing before an order decision.
Australia compliance planning
What should Australian buyers verify before supply?
Verify the requirements for the exact model and intended supply. Request current evidence for any product-safety, labelling or installation claims being relied on. The official sources below provide general guidance, not a VENACE product certification.
Australian Government guidance
“If you supply or manufacture products, you need to make sure they are safe.”
Source: Australian Government, business.gov.au. Accessed 13 October 2026.
ACCC sourcing guidance
“If you supply consumer products in Australia, you are legally responsible for product safety.”
Source: ACCC Product Safety, productsafety.gov.au. Accessed 13 October 2026.
VENACE manufactures in Guangzhou, China. This page does not claim an Australian factory, warehouse, local stock or product certification. Buyers and importers should verify the current obligations for the exact product and intended supply.
Buyer questions
What do Australian buyers ask about VENACE ironing boards?
Start with product fit, then confirm supply terms. These answers cover laundry and wardrobe applications, drawings, samples, MOQ and OEM review. Model-specific details are confirmed in writing.
Which Australian buyers can enquire?
VENACE accepts B2B enquiries from importers, distributors, cabinet and furniture manufacturers, joinery businesses, retailers, hotels and project buyers.
Which ironing board formats are available to review?
The current website presents wall-mounted, wall-mounted fold-down, folding pull-out and built-in cabinet formats. Confirm the exact model, availability and current drawing for your enquiry.
Can I plan an ironing board into a European laundry?
Yes, a cabinet-integrated or wall-mounted format can be reviewed for a European laundry. Fit depends on the actual cupboard dimensions, door movement, appliance access, mounting surface and open-board clearance. Send the layout before selecting a model.
Will it fit a 450 mm or 600 mm cabinet?
Nominal cabinet width alone does not confirm fit. Send internal clear width, depth and height in mm, carcase panel thickness, hinge and runner positions, and opening clearances. Compare these with the current drawing for the exact model before finalising the cabinet.
Can I request a drawing or sample?
Yes. State the product and installation context in the form. Drawing version, sample availability, charges and shipping are confirmed case by case.
What are the MOQ, price and lead time?
These depend on the exact model, quantity, customisation, packaging and destination. VENACE will confirm the applicable commercial terms in writing.
Can VENACE review OEM or private-label requirements?
OEM and private-label enquiries can be reviewed. Feasibility, artwork, packaging and order conditions must be confirmed for the specific project.
Does VENACE claim Australian stock or local certification?
No such claim is made on this page. VENACE manufactures in Guangzhou, China. The buyer or importer should verify the current Australian obligations for the exact product and intended supply.
Australia project enquiry
Ready to review your Australian project?
Send your application, measurements and delivery postcode for a model review or trade quote. Use the project details field for your laundry or wardrobe layout and dimensions in mm. Drawing, sample and commercial requirements can be confirmed with the team.
- Company and buyer type: joiner, cabinet maker, distributor or project buyer
- Application: dedicated laundry, European laundry or walk-in robe
- Internal dimensions in mm and preferred product format
- Estimated quantity and Australian delivery suburb / postcode
Request a trade quote or drawing
Use Australia as the country and describe your installation in the project details. Required fields help the team review the enquiry.
Your enquiry is handled under the VENACE Privacy Policy.