Ironing Boards Since 2011
Drawer Ironing Boards
A drawer ironing board is a folding board mounted inside a standard drawer box; open the drawer, unfold the board and it rests at drawer height. It fits.
Wholesale & Manufacturing
Direct answer: A drawer ironing board is a folding board mounted inside a standard drawer box; open the drawer, unfold the board and it rests at drawer height. It fits drawer spaces from about 14-1/2 to 20-1/4 in wide with at least 4 in of height and 19-1/2 in of depth, unfolds to roughly 37 x 12 in, and suits kitchens, vanities and laundry cabinets.
Key buyer questions
What size drawer do you need for a drawer ironing board?
Check internal cabinet width, depth and height against the current product drawing. Measure both the stored position and the full operating path, including doors, drawers, appliances, user stance, and service access.
Can a drawer ironing board be installed in a bathroom vanity?
Check internal cabinet width, depth and height against the current product drawing. Measure both the stored position and the full operating path, including doors, drawers, appliances, user stance, and service access.
How does a drawer ironing board fold out?
Evaluate the question against the intended application, internal cabinet width, depth and height, and the exact model documentation. A representative sample and written approval record are the safest basis for a project decision.
What is a drawer ironing board?
For drawer ironing board, begin with the intended user, storage location, and required workflow. The category name creates a shortlist; the exact drawing, instructions, sample, evidence, and commercial assumptions decide whether the product is suitable.
Review the relevant VENACE ironing board format, then confirm site dimensions and project requirements in writing before approval.
What drawer size does it need?
The fit question for drawer ironing board is decided by internal cabinet width, depth and height. Mark the reference points on a drawing, keep one primary unit system, and verify both the stored envelope and the full working envelope.
Allow for doors, drawers, shelves, appliances, the user’s stance, garment movement, the iron and cord, and access to fasteners or service parts. Typical category dimensions are useful for screening; the current model drawing controls installation.
Fixed or swivel: how do drawer boards deploy?
For drawer ironing board, begin with the intended user, storage location, and required workflow. The category name creates a shortlist; the exact drawing, instructions, sample, evidence, and commercial assumptions decide whether the product is suitable.
Review the relevant VENACE ironing board format, then confirm site dimensions and project requirements in writing before approval.
Which cabinets suit a drawer ironing board?
Installation of a cabinet-stored pull-out or drawer ironing board starts with the wall or cabinet construction, fixing locations, internal cabinet width, depth and height, and access to each mounting point. Fastener selection must follow the actual substrate, loads, current drawing, and local practice.
Check the complete opening and rotation path before drilling or cutting. Coordinate doors, drawers, shelves, appliances, outlets, circulation, and service access; structural or electrical work should be handled by qualified people where required.
What are the limits of a drawer board?
For drawer ironing board, begin with the intended user, storage location, and required workflow. The category name creates a shortlist; the exact drawing, instructions, sample, evidence, and commercial assumptions decide whether the product is suitable.
Review the relevant VENACE ironing board format, then confirm site dimensions and project requirements in writing before approval.
How do cabinet makers specify drawer boards?
Installation of a cabinet-stored pull-out or drawer ironing board starts with the wall or cabinet construction, fixing locations, internal cabinet width, depth and height, and access to each mounting point. Fastener selection must follow the actual substrate, loads, current drawing, and local practice.
Check the complete opening and rotation path before drilling or cutting. Coordinate doors, drawers, shelves, appliances, outlets, circulation, and service access; structural or electrical work should be handled by qualified people where required.
What evidence should support the decision?
Connect each decision to current, model-specific evidence. Retain the application brief, revision-controlled drawing, approved sample, quotation, and purchase specification so the delivered product can be checked against the same baseline.
| Decision point | What to confirm | Evidence to retain |
|---|---|---|
| Application | Defines the correct product family | Room or cabinet brief |
| Specification | Makes offers comparable | Revision-controlled drawing |
| Sample | Tests fit, movement, and finish | Approved sample record |
| Order | Aligns quality, packaging, and delivery | Purchase specification |
How should a buyer use this information?
Use this page as a screening and briefing tool for Drawer Ironing Boards. Turn the relevant points into a written requirement, compare candidates against the same baseline, and retain the drawing, sample, evidence, and approval revision that supports the decision.
What should you send with an inquiry?
- Buyer type, destination market, and intended application
- Preferred ironing board format or current model reference
- Site, wall, or cabinet dimensions with marked reference points
- Trial quantity and expected order quantity
- Finish, branding, packaging, and documentation requirements
- Requested delivery window and destination
Frequently asked questions
Can a drawer board be fitted in a face-frame cabinet?
Check internal cabinet width, depth and height against the current product drawing. Measure both the stored position and the full operating path, including doors, drawers, appliances, user stance, and service access.
How much of the drawer is left for storage?
The answer varies by model, quantity, customization, packaging, destination, and current production conditions. Ask for a written quotation that states the exact product revision and every assumption; do not rely on a category-level number or an older order.
Can a drawer board be used with a steam iron?
It may be possible, but the answer depends on the selected product, site conditions, and project specification. Verify the current drawing, instructions, and a representative sample before treating the option as approved.
Do drawer boards come with a cover?
Use the exact model reference when requesting care instructions, covers, or service parts. Confirm compatible part numbers, availability, replacement method, and warranty terms in the current supplier documentation.